Leakage, pressure and hipot testing of Coriolis mass flowmeters

Mandatory pre-delivery testing and inspection for the highest level of occupational safety and flowmeter integrity

Challenge

Weld seams along the stem, the flow splitter, the secondary containment or the outer casing are potential weak spots of Coriolis mass flowmeters. Rigorous testing and inspection is required to ensure that these cannot turn into leakage points.

Solution

In order to not only specify but also prove the highest level of  safety prior to delivery, all OPTIMASS Coriolis mass flowmeters undergo mandatory safety tests including helium leak detection, high potential (electrical safety) and pressure tests as standard and for any application.

Safety benefits

  • In-house safety testing of all Coriolis mass flowmeters provides extra safety ex works

  • Monitoring of potential leakages for all OPTIMASS Coriolis flowmeters prior to shipping

  • Helium leakage tests for detecting any leakage from welds (e.g. of the stem, flow splitter, secondary containment or outer casing of Coriolis mass flowmeters)

Newsletter registration

In our newsletter you get the latest news

Register to newsletter

Coriolis Flowmeters in the Chemical Industry

5 products

OPTIMASS 3400

Coriolis mass flowmeter for low flow and dosing applications

OPTIMASS 1400

Coriolis mass flowmeter for universal applications and process control

OPTIMASS 7400

Coriolis mass flowmeter for advanced process applications

OPTIMASS 2400

Coriolis mass flowmeter for highest capacity bulk measurement

OPTIMASS 6400

Coriolis mass flowmeter for advanced process applications

Email
Contact