OPTIBAR DP 7060
with orifice meter run assembly

DP flowmeter for volume flow measurement of liquids, gases and steam

  • For small line sizes
  • Up to +400°C / +752°F; max. 160 bar / 2320.1 psi; (line pressure)
  • Sizes: DN15…100 / ¾…2"
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA

OPTIBAR DP 7060
with orifice meter run assembly

DP flowmeter for volume flow measurement of liquids, gases and steam

  • For small line sizes
  • Up to +400°C / +752°F; max. 160 bar / 2320.1 psi; (line pressure)
  • Sizes: DN15…100 / ¾…2"
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA

Overview

The calibrated orifice plate meter run with OPTIBAR DP 7060 is a DP flowmeter for volume flow measurement of liquids, gases and steam. It features an inlet and outlet section to guarantee low-disturbance flow measurement. The DP flowmeter is wet-calibrated and designed for use in small line sizes up to DN50 / 2” where the impact of certain parameters such as flow profile, surface property or roughness of the pipe walls is particularly strong. In this way, it meets the demands for higher accuracy DP flow measurement even in applications with small diameter piping.

  • Supplied completely assembled and ready for installation
  • Standardised acc. to ISO 5167 (for pipes >DN50 / 2") or ISO TR15377 (for pipes <DN50 / 2")
  • With inlet and outlet section for low-disturbance flow measurement
  • All measurement uncertainties under operational conditions are known and can be calculated
  • Optional temperature and pressure compensation
  • Unique 3D linearisation of transmitter: compensation for all influencing factors at virtually all possible combinations
  • With flange or weld in connection
  • Numerous versions with different types of orifice plates or nozzles available
  • Large choice of wetted materials for corrosive and non-corrosive media

Email
Contact